Hey guys. so this week i have the complete main structure of the device and also milled out the top section for the speaker in which i will be adding wire mesh to act as the speaker cover. there is a clear partline i have included but cutting the wood in have and then just adding a 1mm thick piece of plastic sheeting. still to be done is the grip in which i will be able to do at home along with the painting stages.
- Kieran J.
3 comments:
Nice shape Kieran... I can imagine it must have been difficult to carve out due to its non-symmetrical shape. I think the wired mesh idea is sweet and neat… go for it
good luck
Jeff
Hey Kieran your model is coming along good should look good once it is painted up. yeah i would have to agree with jeff the mesh will look good, it should make your model look realistic. good luck look forward to the finished model.
Jamie
Hey Kieran forgot to mention using MDF you will need to paint it with a undercoat to seal the timber 1st because doesn't matter how many coats of paint with the can it will just keep soaking into the wood and look dodgy. Jamie
Post a Comment